The RC-SDA Gen3™ is a single input, dual output distribution amplifier designed specifically for the Poly EagleEye IV and Poly EagleEye Director II with or without Poly codecs. The RC-SDA Gen3™ provides flexible implementation options allowing Poly cameras to be used for separate concurrent video applications. When used in conjunction with our RC4-E4P™ or RC7-PD2™ kits, the RC-SDA Gen3™ provides HDCI connectivity to the Poly codec and HDMI connectivity to 3rd party devices. The RC-SDA Gen3™ also expands the options for meeting room use; the Poly camera can be used for other applications, such as a BYOD (bring-your-own-device) soft codec or HDMI distribution. Last, but certainly not least, the RC-SDA Gen3™ enables control of the Poly EagleEye IV or Director II from the Poly remote or a 3rd party controller while also supporting Visca to Poly and Poly to Visca camera control translation.
Supports Poly camera stand-alone installations.
Facilitates integration of Poly codecs with non-Poly cameras.
Simple Plug & Play installation.
Integrated 1x2 HDMI Distribution Amplifier.
Integrated RS232 Port to enable camera control via third party control systems.
Can be used in conjunction with either our RemoteCam4™ or RemoteCam7™ extension kits.
Translates Poly RS232 commands to VISCA and VICSA to Poly RS232 commands.
Field-upgradable firmware via microSD Card.
In high security environments, the microSD card slot can be permanently disabled.
8 position Dip Switch for configuration flexibility.
Inclusive of RC-SDA Module, Cables and Power Supply
RC-SDA Gen3™ Module
RCC-H001-1.0M HDMI Cable
RCC-M001-1.0M DB9-F to DB9-F Cable
RCC-M002-1.0M 3-Pin Phoenix to DB9-F Cable
WPS-12 Power Supply
Warranty - Yes
Spec Sheet available - Yes
UL, CE, FCC, CCC, TÜV, RCM+GEMS, LPS, BIS, PSE, CB, DoE VI, CoC V5 and RoHS2
AC Voltage (Maximum):
AC Voltage (Minimum):
HDMI, up to 3840x2160p at 60Hz
HDMI from Camera
Video Output 1:
HDMI to Poly Codec (downscaled to 1920x1080p)
Video Output 2:
HDMI Secondary Output (output resolution matches full input resolution)
9-Pin D-Sub Male From Camera, IR Passthrough on Pin 9
Third Party Control System
RC-SDA Gen3™ Module:
Dimension: H: 1.51 x W: 3.81 x D: 3.52 inch; Weight: 0.5 lbs / 226g; Power Consumption: 2.7W
WPS-12™ Power Supply (Included):
Dimension: H: 1.19 x W: 1.85 x D: 4.65 inch; Weight: 0.5 lbs / 236g: Output Connector: 5.5mm x 2.5mm DC Barrel