The ENVIROMUX® Remote Power Reboot Switch is used to remotely reboot and control power (on/off) to a server or other powered device over IP.
Two operating modes for power reboot:
Manual – select the outlet and turn the power on/off/cycle.
Auto – scheduled, triggered, or configurable combination.
Scheduled – set date/time/duration of power cycle.
Power on/off a device when a sensor connected to the digital input changes state.
Reboot (power cycle) and control power (on/off) to unresponsive IP devices that are connected to the PWR-RMT-RBT-C13 power outlet.
Configure, control, and monitor the unit via the easy-to-use web interface or HTTP REST API – makes it easy to control power from anywhere in the world.
Two digital inputs to monitor alarm contacts, environmental sensors, relays, and switch closures.
Shut down power when water or other environmental threats are detected.
Two digital open collector outputs for control of external devices – drive relays for process control, security, and environmental controls.
Digital outputs activate upon triggered event or via the user interface.
Monitor (ping) up to two IP network devices.
Unresponsive IP devices can be configured to trigger the outlet of PWR-RMT-RBT-C13 to power on/off/cycle.
Automatically configures network settings received from a connected DHCP server.
If a DHCP server is not found, the default static IP address will be used.
Dual password protection with separate user and administrator passwords.
Integrated mounting brackets for easy surface/wall mounting.
Optional DIN mounting available.
The Remote Reboot Switch is the ideal solution for many applications, such as:
Remote reboot of any device, router, server, kiosk, etc. The device need not be network attached.
Secure sensitive devices by keeping them powered off when not in use. This prevents hackers from detecting them at all times.
Power down equipment when not needed for power savings and to save on wear and tear.
Power up alert devices (sirens or lamps) or environmental systems (heaters, coolers, pumps, etc.)
Cascade an unlimited number of PWR-RMT-RBT-C13 using the digital I/O screw terminals.
For a single user interface, use with E-MNG-SH Self-Hosted Enterprise Environment Monitoring System Management Software. (Support coming soon.)
Features coming soon:
Compatibility with E-2D, E-5D, and E-16D as an IP sensor.
Compatibility with E-MNG-SH Self-Hosted Enterprise Environment Monitoring System Management Software.
ROHS Compliant - Yes
TAA Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
Operating Temperature (Minimum):
AC Voltage (Maximum):
AC Voltage (Minimum):
Two screw terminal pairs for connecting dry contact devices, Accepts 26 to 16AWG wire, Potential free, Voltage range: 0 to +36VDC, Over-voltage surge protected
Two screw terminal pairs for open-collector outputs, Accepts 26 to 16AWG wire, Rated sink current: 500 mA per output, +5VDC, 22kO pull-ups, Voltage range: 0 to +24VDC, Over-voltage surge protected
One female RJ45 connector. 10Base-T Ethernet interface, 10/100 network compatible. 5 ft (1.52 m) CAT5E cable included
HTTP, TCP/IP, DHCP, Auto-ping TCP Protocol, Operates and configures via HTTP web page., Supports Microsoft Edge, Firefox 1.5 and higher, Google Chrome, and Safari 1.3 and higher (for MAC). Supports HTTP REST API to control power on/off with response in JSON format