The SignDriver® CAT-X video distribution system consists of a video distribution hub which connects to the source and has two local HD15 video output connections that can be used for two local monitors or a local monitor and input to a second video distribution hub. The video distribution n hub also has 4 CAT -X RJ-45 outputs which are used to connect to the remote interface modules. The video distribution hub with audio also has three 3.5mm audio connectors, one input which connects to the source, and two audio outputs for local powered speakers or connection to a second video distribution hub. The audio connection is mono. The remote interface modules have one CAT -X RJ- 45 input, one HD15 video output and one CAT -X RJ-45 output that can be daisy chained to another remote interface module . The remote interface module with audio also has a 3.5mm audio output connector.
The SignDriver®
CAT-X video distribution system is designed to extend standard VGA analog computer video over CAT 5, CAT 5e or CAT 6 unshielded twisted pair cable. As used here, the term VGA refers to the video graphics adapter connector pin- out, the device is NOT limited to VGA (640 x 480) resolution. The analog video source consists of three colors, plus horizontal and vertical sync signals. The video sync signals are encoded along with the color signals and are transmitted over three pairs of the CAT-X cable. The fourth CAT-X pair is used to transmit the audio signal on models with audio.
- Resolutions up to 1600 x 1200p, 60Hz refresh
- Up to 1000ft from hub to the furthest remote
- DDC signal support for local monitor communications
- Daisy chain local and remote modules for larger applications
- Adjustable brightness and cable length controls
- Also extends audio connections over same Cat-x cable